IEC 61439 Certified Electrical Panels for Export | PVOC & Intertek Available – TECO Group

IEC 61439 Certified Electrical Panels for Export: Intertek PVOC Certificates Available on Request

When your project requires importing electrical panels into a regulated market, compliance with international standards is not optional — it determines whether your shipment clears customs or gets held at the port. At TECO GROUP, every panel we manufacture is designed and type-tested to IEC 61439, the international standard for low-voltage switchgear and controlgear assemblies. And when your destination country requires a Pre-Export Verification of Conformity (PVOC), we coordinate the full Intertek certification process on your behalf — so your panels arrive with all the documentation needed for smooth customs clearance.

This article explains what IEC 61439 and PVOC mean, when you need them, and how TECO GROUP supports international customers who require certified panel exports.

What Is IEC 61439 and Why Is It the Standard That Matters?

IEC 61439 is the international standard for low-voltage switchgear and controlgear assemblies. It replaced the older IEC 60439 standard and governs how electrical panels are designed, constructed, and verified. The two parts most relevant to power distribution and motor control panels are:

  • IEC 61439-1 — General rules: defines common requirements applicable to all types of assemblies, covering design verification, materials, construction, and performance criteria.
  • IEC 61439-2 — Power switchgear and controlgear assemblies: covers specific requirements for panels that distribute and control electrical power, including MDBs, SMDBs, FDBs, and MCCs.

Every panel manufactured by TECO GROUP — whether it’s a standalone MDB, a multi-section motor control center, or a complete electrical room — is designed and built to IEC 61439-1 and IEC 61439-2. This is our baseline standard for every project, domestic or international.

IEC 61439 Design Verification: The Three Routes

One of the most critical elements of IEC 61439 is design verification — the process of confirming that a panel design meets all specified performance requirements before it enters production. The standard defines three acceptable methods:

Verification Method Description When It’s Used
Testing Physical testing on a reference design or sample assembly to measure actual performance New designs, high-current assemblies, or when test data from the component manufacturer is unavailable
Calculation Engineering calculations based on verified component data (e.g., temperature rise, short-circuit withstand) Derived designs where component-level test data exists and can be mathematically validated
Design Rules Application of pre-established rules provided by the original manufacturer of the components or enclosure system Assemblies built using validated component systems with published design rules (e.g., ABB, Siemens, Rittal)

TECO GROUP applies these verification methods based on the assembly type and rating. Because we build exclusively with components from ABB, Siemens, Schneider Electric, and Rittal — manufacturers whose component-level type test data and design rules are fully documented — our design verification process is robust and traceable.

What Is PVOC and When Do You Need It?

The Pre-Export Verification of Conformity (PVOC) is a government-mandated quality and safety assessment programme adopted by multiple countries. Its purpose is to verify that imported goods comply with the applicable national technical regulations and standards before they leave the exporting country.

Under a PVOC programme, electrical panels must be inspected and certified by an authorized inspection body — such as Intertek — in the country of manufacture. Only after passing this inspection is a Certificate of Conformity (CoC) issued, which is the mandatory document required for customs clearance at the destination port.

Not Every Export Requires PVOC

PVOC certification is not included in our standard delivery — it is a service we provide on request when your project destination requires it. Many countries in the Middle East, GCC, and other regions accept IEC 61439 compliance with our standard factory test certificates and documentation without requiring a separate PVOC certificate. However, when your destination country does mandate a CoC, TECO GROUP has the experience and established relationships with Intertek to handle the entire process seamlessly.

Countries That Typically Require PVOC or Conformity Certificates

Based on our export experience, the following markets commonly require a Certificate of Conformity through programmes administered by Intertek or other authorized bodies:

  • East Africa: Tanzania, Kenya, Uganda, Rwanda, Mozambique
  • Middle East: Saudi Arabia (SASO/SALEEM), Kuwait (KUCAS), Qatar, Iraq
  • North Africa: Algeria, Egypt
  • Other: Nigeria, Zimbabwe, Botswana

Requirements vary by country and product category. If you’re unsure whether your project destination requires a CoC, contact our export team and we’ll advise based on the specific HS codes and destination regulations.

What Happens Without a PVOC Certificate (When Required)?

For countries that mandate PVOC, the consequences of shipping without a valid CoC are severe. Consignments arriving without the required certificate can face penalties of up to 15% of the CIF value, mandatory destination inspection at the importer’s cost, and in the worst case, the goods may be re-exported to the country of origin or destroyed. This is a significant financial and timeline risk — one that is entirely avoidable when you request PVOC certification upfront.

How TECO GROUP Handles PVOC When You Need It

When your project requires PVOC certification, we manage the process end to end. Here’s what happens:

Step 1: Engineering & Manufacturing

Every panel is designed and manufactured in our production facility in Amman, Jordan. Panels are built to IEC 61439-1 and IEC 61439-2 using ABB, Siemens, or Schneider Electric components in IP55-rated powder-coated steel enclosures. Each panel includes detailed wiring diagrams, component lists, and configuration documentation — the same engineering package we deliver on every project.

Step 2: 100% Factory Testing

Before any panel ships, it undergoes our routine factory test (RFT) programme. This includes visual and dimensional checks, mechanical operation verification, applied voltage tests (3kV for 1 minute on power circuits to earth), and full electrical and functional operational checks. A Routine Factory Test Certificate is issued with every panel — this is standard for all orders, whether PVOC is required or not.

Step 3: Intertek On-Site Inspection

Once manufacturing and testing are complete, we coordinate the Intertek inspection at our Jordan facility. Their inspectors verify that each panel matches the product descriptions, standards references, component specifications, and technical documentation submitted in the Request for Conformity (RFC). For electrical panels, the applicable standards are confirmed — typically IEC 61439-1 and IEC 61439-2 as adopted by the destination country’s national standards body.

Step 4: Certificate of Conformity (CoC) Issuance

After successful inspection, Intertek issues the Certificate of Conformity (CoC). The CoC covers every item in the shipment individually — listing each panel with its product description, brand, model, enclosure size, quantity, HS code, applicable standard reference, and country of origin. The certificate is valid for three months from the issuance date and is a mandatory document for customs clearance.

Step 5: International Shipping

With the CoC in hand, the consignment ships — typically via ocean freight (FCL) for large project orders or via DHL Express for smaller shipments ordered through our online shop. The CoC accompanies the shipping documentation, ensuring smooth customs clearance at the destination port with zero delays.

What Gets Certified: Scope of a Typical Export Shipment

A single PVOC-certified shipment from TECO GROUP can include a wide range of panel types and electrical accessories — all manufactured, tested, and certified under one Certificate of Conformity:

  • Main LV Panels — Multi-section assemblies with ATS, capacitor banks, and busbar systems. Browse MDB panels
  • Sub-Main Distribution Boards (SMDB) — Custom-built panels for zone distribution. Browse SMDB panels
  • Final Distribution Boards (FDB) — ABB Minicenters and Comby boards for apartments, villas, and common areas. Learn more about FDBs
  • Motor Control Centers (MCC) — VFD, soft starter, star-delta, and DOL configurations. Browse MCC panels
  • ATS & Synchronization Panels — For automatic power transfer and generator management. Browse ATS panels | Browse SYNC panels
  • APFC Panels — Standalone or integrated power factor correction. Browse APFC panels
  • Isolator Panels — Standalone incoming/outgoing isolator enclosures
  • Earthing & Lightning Protection — Copper earth rods, clamps, and earthing accessories

Every item — whether a 5-section 1600A main LV panel or a 6-way apartment distribution board — is individually listed in the CoC with full traceability.

Why Choose TECO GROUP for International Panel Projects?

Many panel builders focus on domestic supply and leave international compliance to others. TECO GROUP is different. We combine local manufacturing expertise with international export capability:

IEC 61439 as standard. Every panel we build — for local or international projects — is designed and verified to IEC 61439. This is our engineering baseline, not an upgrade.

PVOC certification on request. When your destination requires it, we handle the full Intertek coordination — RFC submission, on-site inspection, and CoC issuance — as part of our project delivery. No third-party agents needed.

Authorized component partnerships. We are an authorized partner of Siemens, Schneider Electric, and Rittal. Every component in your panel is genuine, traceable, and backed by manufacturer documentation.

Proven export track record. We’ve delivered panels to projects across the Middle East, East Africa, and the GCC — from commercial buildings and hospitals to pumping stations and wastewater treatment plants. See our full reference list and gallery.

Single point of responsibility. Design, manufacturing, quality assurance, certification, and shipping — all handled under one roof. You get one contact, one timeline, and one invoice.

Get Started

Whether you need IEC 61439-certified electrical panels for a local installation or an international export project requiring PVOC certification, TECO GROUP has you covered.

Design. Build. Test. Certify. Ship.

TECO Group – Jundi Electrical Industry | Amman, Jordan
Phone: +962-6-4883215 | Email: info@tecogrp.com
Working Hours: Sat–Wed 8:30 AM – 5:30 PM | Thu 8:30 AM – 2:00 PM